A Case of the Shingles

Not too long ago I picked up a new project, a '52 Olds Super 88, which I dubbed "The Super". A lot of work as progressed on The Super, and also a lot of revelations. I can easily say The Super is living up to it's name, namely super rusty! When I first looked it over, the car appeared relatively rust free. It had an east coast undercoating job and the front fenders, door hinge pockets, quarter panels and trunk were mint. Even the spare tire holder was cherry. With a car that rust free, how could I go wrong? Let me tell you how wrong I was...

Soon after I repaired the water pump I decided to replace the carpet and spruce up the interior. No big deal, right? Wrong. I'll spare you the details of wrenching out the coffin-like seats, and get straight to the carpet. The carpet was filthy, way beyond cleaning, and looked as though a small contingency of barn yard animals had slept on it.

The first sign that something wasn't quite right was when I removed the seat belt  brackets and saw these rusty footprints.

Hey look, old school tar floor insulation. At least that's what it looks like...















                                                                              



Then I pulled it up... This is what the previous owner used for floor insulation - roofing shingles! The roofing material worked well, at holding in moisture. Every bit of water that ran under the carpet got trapped under this barrier and stayed there, creating ideal conditions for rust. What was probably put down for protection actually ended up increasing the rate at which the floor pans were rusting!

Behold the petri dish of moisture and rust formally known as floor boards. This looks worse then it actually is... really.

After lots of scraping, cleaning and prep work, I applied a nice thick coat of Por 15. The floor pans had minimal holes, it was mostly heavy surface rust. After the prep the pans still felt stiff and strong. Heck, I figured if they could hold my weight they were strong enough. Once the Por 15 was dry, the floor pans looked great. Rust? What rust?          

 





With the new carpet in place the interior is already looking 100 percent better.

   Here it is all back together and looking pretty sharp.

To completely remove an interior and put it back in is quite an experience. One that I hope not to repeat anytime soon!

Now that the inside was complete, it was time for me to tackle the outside, namely the paint. After a close inspection, it looks like the car was only repainted once, a long, long time ago. Was it lacquer? Was it enamel? Who knows? Stay tuned as I attempt to color sand and buff The Super's paint. This ought to be interesting...

It Lives! Olds Cutlass Raised From the Dead

So I got my '72 Cutlass, Number 1, running great after quite a bit of work. Funny thing about cars that sit for long periods of time - they tend to fall apart. This is the case with Number one's interior, the front seat to be exact. After pulling off my custom seat covers (T-shirts) the seat looked as though a gang of squirrels had rumbled on it.

See, what did I tell you. Amazingly, the back seat only has one tear in it. Maybe my squirrel theory is not that far off...

.

.

This is beyond covering with a seat cover so I had to come up with a temporary solution. The seat frame is in excellent condition as well as the springs, plus it is a split bench with the not-so-common fold down armrest in the middle, so I definitely want to keep it for the car. While I can't afford to get it re-covered right now, it can't stay in the car either. I came up with the idea of putting in some bucket seats on a temporary basis, but got sticker shock when I started pricing '72 era bucket seats. The prices were outragous! What the heck, are the seat frames made of gold or something? I was almost set to buy a pair of those racing type seats you see in all the imports (yea, I know) when I came across a deal too good to pass up.

I found a set of bucket seats advertised on craigslist for a paltry $40 dollars. The ad said they were out of a Mazda RX7 and in very good condition. Hmmm, sounded like it might be worth a look. When I got there I discovered they were non-electric, leather covered, and felt good to sit in. Sold! Even though these came with the tracks, the Japanese must assemble their cars vertically, because the bolt holes in the tracks were all facing horizontal. I'll show them! That's what good old American angle iron is made for, even though the piece I used was probably made in China.

.

.

.

.

This is what I had to do to bolt the Mazda seats

in. Yeah, I know their burgandy, but they are also temporary. They bolted right to the original holes with my custom angle brackets, if you can believe that!

.

.

.

.

.

Here is the burgandy bun rester all bolted in. One down, one more to go. These seats should fill in nicely until the original split bench seat is ready to re-install.

.

.

.

.

.

After my bargin basement seats are installed and years of dust vacuumed up, the interior should be driver quality. Up next, it will be time to address the exterior. I'm not a big fan of primer, and I love patina, so stay tuned to see what I come up with to make Number 1 look a little more presentable and less like a rusting oil tanker.